top > MIKI HOUSEProduct Repairs, Handling Methods, and Care > How to Handle Products > How to Handle Oak Village Beds

Beds and desksHow to handle

（ 46-5085-141 ）
Baby bed

MIKI HOUSE×Oak Village Series

We will introduce how to handle beds and desks.
For safety, be sure to read the instruction manual carefully before using it correctly.
The instruction manual can be downloaded from the following.
Instruction Manual PDF
Assembly method Slide show
Precautions for use
Care instructions
At times like this
inquiry
 

Assembly method

With a slideshow video
You can take a look
Be sure to read the instruction manual carefully before assembling it.
Notes on assembly and disassembly▼

Notes on assembly and disassembly

  • When assembling or disassembly, always follow the instruction manual.2Please do so by someone or more.
  • Before assembling, check the number of screws and parts, and tighten and secure them firmly when assembling.
  • Please be careful not to get injured by sharp parts of assembly parts (screws, hex wrenches, etc.).
  • Install the furniture on the floor to ensure it is stable.
  • If used in an unstable state, there is a risk of furniture being warped, damaged, or falling over.
How to assemble a baby bed
Relocating from a baby bed to a low bed
Assembling the desk
Dismantling the bed
Desk dismantling

Precautions for use

For safe use
 Be sure to read

Precautions for use

  • Before using, make sure there are no rattling on each part and that the screws are tightly tightened.
    Also, please check regularly to make sure there are no loosening or rattling.
  • The product should be installed on a level, strong floor. Do not install in unstable places where it may fall or fall.
  • When using the bed, be sure to lock the casters and secure the bed.
    When moving the bed, be sure to unlock the casters and not drag them.
    After moving, lock it again and secure it.
    Also, if the floor surface is made of a material that is prone to scratches, please use it on a rug.
  • Do not install in high-temperature or humid places as the product may deform or mold may develop in humid places.
  • Please avoid direct sunlight, heat, or strong heating and cooling winds directly exposed to the product. This may cause the product to become warped or cracked.
  • The wood and paint of the product may deteriorate due to chemicals (acids, alkalis), heat, etc.
  • Do not use near fire such as a stove or stove. This may cause a fire.
  • For safety reasons, never use it if it is broken or damaged.
  • Do not repair or modify the product by someone other than the manufacturer. This can weaken the strength of the product and cause injury.
    If repairs are required, the instruction manualP22in accordance withMIKI HOUSEPlease contact our Customer Service Center.

Safety precautions

caveat

Due to incorrect handling,This content may result in death or serious injuries.

caveat

  • Infant beds are postnatal24It is used by infants and young children within the last month. Use as a bed after birth24Please within a month.
  • Once your child is able to hold onto the child and stand up (although it is generally after birth)5(more than a month) the height from the top of the floor board to the top of the fence60cmTo ensure that the above is true, lower the floor board to the bottom position before use.
  • Do not place anything around or inside the bed that will put your child's feet on it as there is a risk of it falling. Also, do not attach strings or other items to the bed.
  • Please be careful not to get the strings of your child's clothing to get caught on the bed frame, etc.
  • If your child's head is smaller than the spacing between the fences on the bed frame, please use with great care.
  • Once you have finished using the front frame (sliding type), do not leave it lowered, but be sure to return it to its designated position and secure it.
  • Make sure to insert the left and right latches on the front frame into the holes to lock them.
  • Please use and store assembly parts (screws, hex wrenches, etc.) out of reach of small children, and be careful not to accidentally swallow them.
  • Please be careful not to pinch your hands or feet in movable parts such as the front frame of the bed.
  • Do not sit, hang or shake the front frame. Also, do not jump up and down or apply excessive loads on the bed.
  • Do not move the bed with your child on it.
  • This baby bed is internally sized70 x 120cmis. Mattresses and futons, etc.70 x 120cmUse a body size with no gaps and a moderately hard.
  • at the same time2Please do not use this product by children more than one person.
  • Do not use the desk top as a step stool to avoid riding on top. Please be especially careful not to let children ride and play.

SGAbout the Mark System

SGThe mark is determined by the Product Safety AssociationSGCertified as compliant with the standardsThis is the safety and security mark displayed on the products that have been made.SGof products with marksIf a defect is deemed to cause personal injury, the Product Safety Association will be responsible for accidents.This is a system in which compensation measures are implemented depending on the cause and extent of the damage. For infantsFor beds, from the date of purchase5The validity period is within the year.

SG Mark

SGMark's compensation system is covered after birth24Only the infant bed itself is used by infants and young children within the month.

※After birth24Use after months is not eligible.

Mattresses and futons are also not included. This does not apply to cases where it is used as a desk.
 

Baby bed Only eligible for 24 months after birth (bed body only)
Low bed Only eligible for 24 months after birth (bed body only)
desk Not applicable
  • Notes on compensation

SGEven if the marked product itself breaks down, we cannot guarantee the quality of its products. Just
This is a system that compensates for physical damages such as injuries (personal damage).
 

  • If an accident occurs due to a defect in the product

If an accident occurs, please contact the Product Safety Association immediately.
(As a general rule, it starts from the date of the accident.60(within days)
For inquiries, please visit the Product Safety Association website.Contact formPlease check.

Notes only on solid wood

  • Wood grain is a "natural design" and also the individuality of natural wood. The surface color depends on the grainWEBThe photos may differ from those on the website, etc.
  • Wood intakes and releases moisture from the air. Please avoid using in the following places as moisture or dryness may cause distortion and other deformation.　
    　-Near the heat of the stove or in direct sunlight　
    　-Air conditioners, hot air heaters, etc., for dry air outlets　
    　-Extremely humid places

 
Please note the following to ensure that you can use it in good condition for a longer period of time.

  • Do not place a hot pot or kettle directly on the baking sheet. There may be burn marks left and you may not be able to erase them.
    Be sure to use a trivet or something similar.
  • Do not place wet metals (steel cans, aluminum cans, iron kettles, copper products, etc.) directly on the top plate. Woody components may react with metal ions, causing black stains, which may not be possible to remove them.
  • When placing food and drinks when using as a desk, be sure to use a coaster or placemat.
  • Do not install in direct sunlight or near heating and cooling equipment. This can cause warping, distortion, cracking of wood, and deterioration and deterioration of the paint.
    Even if the wood (solid wood) breathes and expands due to humidity, the structure is made of a small plate on the rear frame, which prevents the occurrence of defects.

Care

To ensure long-term use in good condition
Here are some tips for how to care for your home

Daily care methods

  1. There may be dust and other substances attached to the product, so wring a soft cloth wet with water tightly and wipe off the whole piece before using.
  2. Do not apply tapes or stickers directly to the product. If you force it off, marks may remain or damage the surface of the wood.
  3. For daily care, wipe it dry with a soft cloth or wring a soft cloth wet with a water-drained soft cloth.
  4. This product is made from solid wood and is finished with vegetable oil. The paint is gentle and natural, taking advantage of the natural texture of natural wood, but unlike chemical paints such as urethane coating, it also has a delicate feel.
  5. Water and oily stains can cause stains, so wipe them off immediately.
    Please avoid using solvents containing oils such as synthetic detergents, thinners, benzines, waxes, etc. as this may cause the paint to peel off.
  6. Rubbing with chemical rags or abrasives can damage the painted surface.Please avoid this as this may cause the paint to peel off.

Care points　

In addition to the usual cleaning, cleaning even small areas such as wood grain and dust in gaps will help your furniture last longer.
Please enjoy the beautiful structure that is unique to wood.

About the installation location

  • Wood intakes and releases moisture from the air. Moisture and dryness in the room can cause distortions and other deformations.As this may occur, please avoid using the product in the following places:
    　-Near the heat of the stove or in direct sunlight
    　-Air conditioners, hot air heaters, etc., for dry air outlets
    　-Extremely humid places
  • Do not install in the following locations as this may cause warping, distortion, cracking of wood, and paint deterioration or deterioration.
    　-Places exposed to direct sunlight
    　-Heating and cooling equipmentnear

About storage location

  • Store in a low humidity location.
    ※Moisture can cause mold and stains.
  • Avoid high temperatures, humidity and direct sunlight.

 
Daily care is important to keep your natural wood furniture in a longer and better condition.

Display based on the Household Goods Quality Labeling Act

External dimensions: Width1260㎜×Depth770㎜×height1150㎜
Deck surface material: natural wood
Surface treatment:Oil finish (vegetable oil coating)

At times like this

When you lose parts

  • Please contact us via the inquiry page.
    As this is dangerous, please do not use the product when there are no parts at all.

When you're worried about rattling

  • Stop using the product and make sure the number of screws and other parts is correct and is tightly tightened without any looseness.

When you're concerned about the grain and color

  • Wood grain is a "natural design" and also the individuality of natural wood. The surface color is dependent on the grain, so it is onlinesiteThe photo may differ from the one shown below.
  • The longer you use this product, the more it ages, it will become a beautiful amber color. By repainting the paint (for a fee), the original wood will be reborn as an attractive item.

If it gets damaged

This product is made using the reliable skills of our craftsmen, with a focus on materials, design and construction methods so that our customers can use it for a long time.
If damage or malfunction occurs after normal use, we will repair it, so please contact us at the dealer where you purchased it.MIKI HOUSEPlease contact our Customer Service Center.
Also, if you have any details or questions regarding repairs, please feel free to contact us.
Depending on the damage and usage conditions, we may be unable to provide repairs for a fee or we may not be able to accept repairs, but we will do our best to make any suggestions possible.
 
If you would like to request repairs, please present the warranty card and then click on the dealer where you purchased it.MIKI HOUSEPlease contact our Customer Service Center.

Product related
inquiry

Product inquiries

[Seller]

〒 581-8506 Wakabayashicho, Yao City, Osaka City 1-76-2
 TEL ： 072-920-2111
 (Excluding Saturdays, Sundays and public holidays). 10:00 ～ 17:00 ）